Instructions for Use 4 Installation
2660021169042 Rev. A 2018-03 4.1 Safety During Installation
2660021169042 Rev. A 2018-03 47 / 246
4 Installation
4.1 Safety During Installation
WARNING!
Unauthorized Installation
Unauthorized installation could lead to the injury of patients and
operators, as well as to property damage.
u Only ZEISS authorized personnel may install Zeiss products.
WARNING!
Incorrectly configured or installed hardware
can lead to damage to the device or components, as well as
possible injury to patients or operators.
u Allow only trained ZEISS Meditec personnel to carry out any
and all operations in connection with the device and its
associated components.
u Do not attempt to unpack the instrument components yourself.
u Do not attempt to install any component of the device yourself.
u Do not attempt to connect any cables in connection with the
device yourself.
u Do not attempt to setup or start the device or any of its
associated components yourself.
4.2 Installing the Instrument
You are not responsible for installing PLEX® Elite 9000 hardware or
software.
The PLEX® Elite 9000 arrives with its table and associated compo-
nents on a pallet in a number of separate shipping boxes. Do not
allow institution personnel to unpack or open any of these
containers.
On arrival, the ZEISS Field Representative will carefully unpack and
assemble all system components at the location you have selected
for its placement. Once the PLEX® Elite 9000 is assembled, a ZEISS
Service Representative will set up an appointment to install the
PLEX® Elite 9000 software.
When the instrument installation is complete, configure the
software (see Configuring Software [}57]).
To Next Page
Loading...
