Instructions for Use 6 Configuring Software
2660021169042 Rev. A 2018-03 6.1 System Administration
2660021169042 Rev. A 2018-03 57 / 246
6 Configuring Software
6.1 System Administration
Logging in as the System Administrator allows access to additional
configuration, including:
• Managing User Accounts [}61]
• Editing the Instrument Identifier [}61]
• Editing Your Institution Information [}60]
6.1.1 Initial Configuration Checklist
The first time you use a new instrument or install software on each
Review Station, you must complete initial configuration settings
before you use it.
6.1.1.1 Configuring a New Installation
When you set up the first PLEX® Elite 9000 instrument at your
institution, complete the following settings:
Task
Required Login as administrator
(Log in as Admin [}59])
Recommended Set Admin password
(Log in as Admin [}59]).
Required Set institution name
(Editing Your Institution Information [}60]).
Recommended Set Issuer of Patient ID
(Editing Your Institution Information [}60])
(Optional) Add your logo
(Editing Your Institution Information [}60]).
Required Set station name
(Editing Your Institution Information [}60]).
Recommended (if using DICOM) Set DICOM AE title
(Editing Your Institution Information [}60]).
Required Create user accounts
(Adding a New User [}62]).
Recommended Create patient categories
(Editing a Category [}66]).
Recommended Set archive synchronization
(Setting Archive/Synchronize Alerts [}67]).
(Optional) Set display options
(Setting the Default Patient Screen [}68]).
To Next Page
Loading...
