Zeiss PLEX Elite 9000 - Page 58

6 Configuring Software Instructions for Use
2660021169042 Rev. A 2018-036.1 System Administration
58 / 246 2660021169042 Rev. A 2018-03
Task
Required (if using DICOM) Set up DICOM connection
(Enabling Automatic Worklist Search (DICOM)
[}68]).
Required (if networked) Set internet protocol
(Setting the Preventive Maintenance Schedule
[}70]).
Recommended Configure Windows updates
(Configuring Windows Automatic Updates [}176]).
Required Logout
(Logging Out [}73]).
Recommended Login as Operator
(Logging In as Operator or Data Analyst [}73]).
Recommended Verify instrument performance
(Performance Verification Check [}189]).
Table6: New Installation Checklist
6.1.1.2 Configuring an Additional Instrument or Review Station
When you add an instrument or review station at your institution,
complete the following settings:
Requirement Task
Required Login as administrator
(Log in as Admin [}59]).
Recommended Set Admin password
(Log in as Admin [}59]).
Required Set institution name
(Editing Your Institution Information [}60]).
Recommended Set Issuer of Patient ID
(Editing Your Institution Information [}60]).
(Optional) Add your logo
(Editing Your Institution Information [}60]).
Required Set station name
(Editing the Instrument Identifier [}61]).
Recommended (if using DICOM) Set DICOM AE title
(Editing the Instrument Identifier [}61]).
Recommended Set archive synchronization
(Setting Archive/Synchronize Alerts [}67]).
(Optional) Set display options
(Setting the Default Patient Screen [}68]).