IES-2000/3000 User’s Guide
ALC1024 Specific Commands 7-11
192.168.1.1 adsl> show profile debug
#Entry type : adslLineConfProfileEntry
ConfProfileName : debug
AtucConfTargetSnrMgn : 6 db
AtucConfMaxSnrMgn : 31 db
AtucConfMinSnrMgn : 0 db
AtucChanConfInterleaveMinTxRate : 32 Kbps
AtucChanConfInterleaveMaxTxRate : 8000 Kbps
AturConfTargetSnrMgn : 6 db
AturConfMaxSnrMgn : 31 db
AturConfMinSnrMgn : 0 db
AturChanConfInterleaveMinTxRate : 32 Kbps
AturChanConfInterleaveMaxTxRate : 800 Kbps
ConfProfileRowStatus : active(1)
This display shows that the maximum upstream transmission rate is set to 800 kbps and the maximum
downstream transmission rate is set to 8000 kbps. The ConfProfileRowStatus displays active; this
means that the profile is available for use. It does not mean that the profile has been applied to any of the ports.
Please refer to the set port command for information on assigning profiles to ports or the list profiles
command for information on how to list the profiles
7.5.16 Show Profiles Command
Syntax:
192.168.1.1 adsl> show profiles
The show profiles command displays the settings of all the ADSL profiles.
7.5.17 Set Port Command
Syntax:
192.168.1.1 adsl> set port <port number> <profile name> <oper mode>
where
<port number>
=
A port number ranging from 1 to 24.
<profile name>
=
The profile that will define the settings of this port.
<oper mode> =
Operational mode. Choose from glite, gdmt, t1413 or auto
for Annex A. Choose from anxb or auto for Annex B.
To Next Page
Loading...
