ZyXEL Communications NR/FWA Outdoor Series - Custom DHCP Configuration

Chapter 9 Home Networking
NR/FWA Outdoor Series User’s Guide
132
to your DHCP clients. For example, DHCP option 6 can tell the DHCP client which DNS (Domain Name
Server) to use for name resolution along with its IP configuration.
Use the following screen to configure custom DHCP option on your Zyxel Device. Click Network Setting >
Home Networking > Custom DHCP to display the screen shown next.
Figure 84 Network Setting > Home Networking > Custom DHCP
The following table describes the labels in this screen.
9.5.1 Custom DHCP Configuration
Use this screen to add a DHCP option, as defined in the RFC protocols, and set its content.
Click Custom DHCP Configuration on the Network Setting > Home Networking > Custom DHCP screen to
display the following screen.
Table 43 Network Settings > Home Networking > Custom DHCP
LABEL DESCRIPTION
Custom DHCP
Configuration
Click this to add a DHCP option you want to sent to your DHCP clients.
# This field displays the index number of the entry.
Option ID This field displays the DHCP option ID.
Option Context This field displays the content of the DHCP option.
Service Name This field displays the interface group that the DHCP option is sent on.
Modify Click the Modify icon to edit an existing entry.
Click the Delete icon to remove an existing entry.