ZyXEL Communications NR/FWA Outdoor Series - Add or Edit DNS Entry; DNS Entry

Chapter 12 DNS
NR/FWA Outdoor Series User’s Guide
170
If you have a private WAN IP address, then you cannot use Dynamic DNS.
12.2 DNS Entry
DNS (Domain Name System) is used for mapping a domain name to its corresponding IP address and
vice versa. Use this screen to view and configure manual DNS entires on the Zyxel Device. Click Network
Setting > DNS to open the DNS Entry screen.
Note: The host name should consist of the host’s local name and the domain name. For
example, Mycomputer.home is a host name where Mycomputer is the host’s local
name, and .home is the domain name.
Figure 117 Network Setting > DNS > DNS Entry
The following table describes the fields in this screen.
12.2.1 Add or Edit DNS Entry
You can manually add or edit the Zyxel Device’s DNS name and IP address entry. Click Add New DNS
Entry in the DNS Entry screen or the Edit icon next to the entry you want to edit. The screen shown next
appears.
Table 62 Network Setting > DNS > DNS Entry
LABEL DESCRIPTION
Add New DNS Entry Click this to create a new DNS entry.
# This is the index number of the entry.
HostName This indicates the host name or domain name.
IP Address This indicates the IP address assigned to this computer.
Modify Click the Edit icon to edit the rule.
Click the Delete icon to delete an existing rule.