Chapter 4 Quick Start
NR/FWA Outdoor Series User’s Guide
43
Figure 30 Wizard – Time Zone
4.4 Quick Start Setup – WiFi
Turn WiFi on or off. If you keep it on, record the WiFi Name and Password in this screen so you can
configure your WiFi clients to connect to the Zyxel Device. If you want to show or hide your WiFi
password, click the Eye icon ( ).
Figure 31 Wizard – WiFi
Note: You can also enable the WiFi using the following methods:
Click Network Setting > Wireless to open the General screen. Then select Enable in the
WiFi field.
Under the Connection Status screen, select Enable in the WiFi Settings field.
4.5 Quick Start Setup – Finish
Your Zyxel Device saves and applies your settings.
To Next Page
Loading...
