ZyXEL Communications NR/FWA Outdoor Series - Turn on Upnp in Windows 10 Example

Chapter 9 Home Networking
NR/FWA Outdoor Series User’s Guide
138
9.8 Turn on UPnP in Windows 10 Example
This section shows you how to use the UPnP feature in Windows 10. UPnP server is installed in Windows 10.
Activate UPnP on the Zyxel Device by clicking Network Setting > Home Networking > UPnP.
Make sure the computer is connected to the LAN port of the Zyxel Device. Turn on your computer and
the Zyxel Device.
1 Click the start icon, Settings and then Network & Internet.
2 Click Network and Sharing Center.