NR/FWA Outdoor Series User’s Guide
74
CHAPTER 7
Broadband
7.1 Broadband Overview
This chapter discusses the Zyxel Device’s Broadband screens. Use these screens to configure your Zyxel
Device for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks, such as a LAN (Local Area Network) and other networks, so that a
computer in one location can communicate with computers in other locations.
Figure 45 LAN and WAN
7.1.1 What You Can Do in this Chapter
• Use the Broadband screen to view a WAN interface. You can also configure the WAN settings on the
Zyxel Device for Internet access (Section 7.2 on page 76).
• Use the Cellular WAN screen to configure a cellular WAN connection (Section 7.3 on page 79).
• Use the Cellular APN screen to configure a WAN connection that includes the Access Point Name
(APN) provided by your service provider (Section 7.4 on page 80).
• Use the Cellular SIM screen to enter the PIN of your SIM card (Section 7.5 on page 85).
• Use the Cellular Band screen to view or edit a WAN interface. You can also configure the WAN
settings on the Zyxel Device for Internet access (Section 7.2 on page 76).
• Use the Cellular PLMN screen to display available Public Land Mobile Networks (Section 7.7 on page
87).
• Use the Cellular IP Passthrough screen to configure a WAN connection (Section 7.8 on page 90).
• Use the Cellular SMS screen to enable SMS Inbox and receive SMS messages (Section 7.10 on page
93).
• Use the Cellular Lock (LTE) screen to configure cellular lock on Zyxel Device that use 4G LTE
connections (Section 7.10 on page 93).
To Next Page
Loading...
