NR/FWA Outdoor Series User’s Guide
218
CHAPTER 22
WLAN Station Status
22.1 WLAN Station Status Overview
Click System Monitor > WLAN Station Status to open the following screen. Use this screen to view
information and status of the WiFi stations (WiFi clients) that are currently associated with the Zyxel
Device. Being associated means that a WiFi client (for example, your computer with a WiFi network card
installed) has connected successfully to an AP (or WiFi router) using the same SSID, channel, and WiFi
security settings.
Figure 150 System Monitor > WLAN Station Status
The following table describes the labels in this screen.
Table 91 System Monitor > WLAN Station Status
LABEL DESCRIPTION
# This is the index number of an associated WiFi station.
MAC Address This field displays the MAC address of an associated WiFi station.
Rate (Mbps) This field displays the transmission rate of WiFi traffic between an associated WiFi station and
the Zyxel Device.
RSSI (dBm) The RSSI (Received Signal Strength Indicator) field shows the WiFi signal strength of the station’s
WiFi connection.
The normal range is –30dBm to –79dBm. If the value drops below –80dBm, try moving the
associated WiFi station closer to the Zyxel Device to get better signal strength.
To Next Page
Loading...
