Chapter 12 DNS
NR/FWA Outdoor Series User’s Guide
171
Figure 118 Network Setting > DNS > DNS Entry: Add or Edit
The following table describes the labels in this screen.
12.3 Dynamic DNS
Dynamic DNS can update your current dynamic IP address mapping to a hostname. Configure a DDNS
service provider on your Zyxel Device. Click Network Setting > DNS > Dynamic DNS. The screen appears
as shown.
Table 63 Network Setting > DNS > DNS Entry: Add or Edit
LABEL DESCRIPTION
Host Name Enter the host name of the DNS entry. You can use up to 256 alphanumeric (0-9, a-z, A-Z)
characters with hyphens [ - ] and periods [ . ].
You can use the wildcard character, an “*” (asterisk) as the left most part of a domain name,
such as *.example.com.
IPv4 Address Enter the IPv4 address of the DNS entry.
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes.
To Next Page
Loading...
