Chapter 14 Interface Grouping
NR/FWA Outdoor Series User’s Guide
179
Figure 125 Network Setting > Interface Grouping > Add New Interface Group/Edit
The following table describes the fields in this screen.
Table 68 Network Setting > Interface Grouping > Add New Interface Group/Edit
LABEL DESCRIPTION
Group Name Enter a descriptive name for this interface group. You can use up to 32 printable characters
except [ " ], [ ` ], [ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ]. Spaces are allowed.
WAN Interfaces
used in the
grouping
Select the WAN interface this group uses. The group can have up to one PTM interface, up to
one ATM interface, up to one ETH interface, and up to one WWAN interface.
Select None to not add a WAN interface to this group.
To Next Page
Loading...
