ZyXEL Communications NR/FWA Outdoor Series - Page 230

Chapter 25 User Account
NR/FWA Outdoor Series User’s Guide
230
Idle Timeout Enter the length of inactive time before the Zyxel Device will automatically log the user out of the
Web Configurator.
Lock Period Enter the length of time a user must wait before attempting to log in again after a number of
consecutive wrong passwords have been entered as defined in Retry Times.
Group Specify whether this user will have Administrator or User privileges.
The Administrator privileges are the following:
• Quick Start setup.
• The following screens are visible for setup:
Broadband, Wireless, Home Networking, Routing, NAT, DNS, VLAN Group, Interface Grouping,
Firewall, MAC Filter, Certificates, Parental Control, Log, Traffic Status, ARP Table, Routing Table,
Cellular WAN Status, System, User Account, Remote Management, TR-069 Client, Time, E-mail
Notification, Log Setting, Firmware Upgrade, Backup/Restore, Reboot, Diagnostic.
The User privileges are the following:
• The following screens are visible for setup:
Parental Control, Log, Traffic Status, ARP Table, Routing Table, Cellular WAN Status, User
Account, Remote Management, Time, E-mail Notification, Log Setting, Firmware Upgrade
,
Backup/Restore, Reboot, Diagnostic.
Cancel Click Cancel to restore your previously saved settings.
OK Click OK to save your changes.
Table 95 Maintenance > User Account > User Account Add/Edit (continued)
LABEL DESCRIPTION