Chapter 26 Remote Management
NR/FWA Outdoor Series User’s Guide
232
Figure 156 Maintenance > Remote Management > MGMT Services
The following table describes the fields in this screen.
Table 96 Maintenance > Remote Management > MGMT Services
LABEL DESCRIPTION
Service Control
WAN Interface
used for services
Select Any_WAN to have the Zyxel Device automatically activate the remote management
service when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the Zyxel Device
activate the remote management service when the selected WAN connections are up.
Cellular WAN Enable the cellular WAN connection configured in Network Setting > Broadband > Cellular WAN
to access the service on the Zyxel Device.
If there are multiple cellular WANs configured on the Zyxel Device, you can select which to use
for the Zyxel Device management.
Service This is the service you may use to access the Zyxel Device.
WAN Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from all WAN connections.
Trust Domain Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from the trusted host IP address.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
To Next Page
Loading...
