Chapter 2 Hardware
NR/FWA Outdoor Series User’s Guide
25
The following are the Zyxel Device’s LED descriptions.
Table 4 NR7102 / NR7103 / NR7123 / FWA710 LED Behavior
LED COLOR STATUS DESCRIPTION
Signal Green On The cellular signal strength is excellent.
Amber On The cellular signal strength is fair.
Red On The cellular signal strength is weak.
Blinking There is no cellular signal, or signal strength is below the weak
level.
Status Green On The Zyxel Device is connected to the Internet.
Blinking The Zyxel Device is trying to connect to the Internet.
Amber On The WiFi is on.
Red On There is a system failure.
Blinking The Zyxel Device is booting.
Green /
Amber /
Red
Looping Firmware upgrade is in progress.
Table 5 NR7302 / NR7303 LED Behavior
LED COLOR STATUS DESCRIPTION
Signal Green On The 5G cellular signal strength is excellent.
Blinking The 4G cellular signal strength is excellent.
Amber On The 5G cellular signal strength is fair.
Blinking The 5G cellular signal strength is fair.
Red On The 5G cellular signal strength is weak.
Blinking The 4G cellular signal strength is weak.
Off Not connected to the Internet.
Status Green On The Zyxel Device is connected to the Internet with WiFi off.
Fast
blinking
The Zyxel Device is trying to connect to the Internet with WiFi
off.
Slow
blinking
The Zyxel Device is booting.
Amber On The Zyxel Device is connected to the Internet with WiFi on.
Fast
blinking
The Zyxel Device is trying to connect to the Internet with WiFi
on.
Red On There is a system failure.
Green /
Amber /
Red
Looping Firmware upgrade is in progress.
Off Power is off.
To Next Page
Loading...
