ZyXEL Communications NR/FWA Outdoor Series - Page 38

Chapter 3 Web Configurator
NR/FWA Outdoor Series User’s Guide
38
3.2.1.3 Dashboard
Use the menu items in the navigation panel on the right to open screens to configure the Zyxel Device’s
features.
TR-369 Local
Agent
MQTT Use the screen to manage the profile settings that the Zyxel Device will
use to register with an MQTT broker.
Agent Use this screen to set the Zyxel Device as an agent, select a cellular
WAN, and configure the Message Transfer Protocol (MTP) to receive USP
messages from controllers.
Controller Use this screen to configure controller settings for topics the Zyxel Device
agent should publish to this controller.
Time Time Use this screen to change your Zyxel Device’s time and date.
E-mail
Notification
E-mail
Notification
Use this screen to configure up to two mail servers and sender addresses
on the Zyxel Device.
Log Setting Log Setting Use this screen to change your Zyxel Device’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your Zyxel Device.
Module Upgrade Use this screen to upload the module firmware to your Zyxel Device.
Backup/Restore Backup/Restore Use this screen to backup and restore your Zyxel Device’s configuration
(settings) or reset the factory default settings.
Reboot Reboot Use this screen to reboot the Zyxel Device without turning the power off.
Schedule Reboot Use this screen to set the time to reboot the Zyxel Device without turning
the power off.
Diagnostic Diagnostic Use this screen to identify problems with the Internet connection. You
can use Ping, TraceRoute, Nslookup, or Speed Test to help you identify
problems.
Table 10 Navigation Panel Summary (continued)
LINK TAB FUNCTION