ZyXEL Communications NR/FWA Outdoor Series - Page 54

Chapter 5 Web Interface Tutorials
NR/FWA Outdoor Series User’s Guide
54
Add New PCP Screen
1 Go to Parental Control > Add New PCP. Under General:
•Select Enable to enable the rule you are configuring.
• Enter the Parental Control Profile Name given in the above parameter.
• Select an user this rule applies to in Home Network User, then click Add. You will see the MAC address
of the user you just select in Rule List.
2 Under Internet Access Schedule:
• Click Add New Time to add a second schedule.
• Use the parameter given above to configure the time settings of your schedule.