ZyXEL Communications NR/FWA Outdoor Series - Page 94

Chapter 7 Broadband
NR/FWA Outdoor Series User’s Guide
94
Figure 62 Network Setting > Broadband > Cellular Lock (LTE)
The following table describes the fields in this screen.
Table 27 Network Setting > Broadband > Cellular Lock (LTE)
LABEL DESCRIPTION
LTE(4G) Lock Management
PCI Lock Slide this to the right to enable PCI (Physical Cell Identifier) Lock on base stations when
the Zyxel Device has 4G LTE connections. Physical Cell ID (PCI) is an identifier for a cell,
namely a cellular base station. PCI and Radio Frequency Channel Number (RFCN) are
combined to specify the base station.
Add New Rule Click to add a new cellular lock rule.
Physical Cell ID Enter the PCI number (0 – 504) of the base station to which you want the Zyxel Device to
connect.
RFCN Enter the RFCN (Radio Frequency Channel Number) for the LTE frequency of the
specified PCI (1 – 65535).
Delete Click the Delete icon to remove an entry.
Cancel Click this to return to previous settings without saving.
Apply Click this to save and apply your changes.
Scan
Note: Clicking Scan will cause a temporary Internet disconnection.