ZyXEL Communications USG FLEX H Series - Page 171

Chapter 11 IPSec VPN
USG FLEX H Series User’s Guide
171
Figure 123 VPN > Site to Site VPN > Add/Edit > Authentication
Each field is described in the following table.
11.3.1.4 Policy & Routing
Use this screen to configure the IP addresses of the computer on your network and the computer
behind the remote IPSec device.
Table 88 VPN > Site-to-Site VPN > Add/Edit > Network
LABEL DESCRIPTION
Pre-Shared Key Select Pre-Shared Key to use a password for authentication. Enter 8-128 alphanumeric
characters (0-9a-zA-Z) or 8-128 pairs of hexadecimal characters (0-9A-F) beginning with
0x.
Certificate Select Certificate to use one of the Zyxel Device certificates for authentication.