ZyXEL Communications USG FLEX H Series - Page 198

Chapter 13 Security Policy
USG FLEX H Series User’s Guide
198
1 Go to Object > Address > Address and click Add.
2 Configure the settings using the parameters given in Table 97 on page 197. Click Apply to save your
changes.
3 Go to Security Policy > Policy Control and click Add.
4 Configure the settings using the parameters given in Table 98 on page 198. Set Log to no so when the
server pings the Zyxel Device, the Zyxel Device will not create logs. Click Apply to save your changes.
Table 98 Security Policy Configuration Example
NAME FROM TO SOURCE DESTINATION SERVICE ACTION LOG
LAN_to_Device LAN ZyWALL Server Any Ping Allow No