Chapter 14 Object
USG FLEX H Series User’s Guide
221
The following table describes the labels in this screen. See Section 14.2.3.1 on page 221 for more
information as well.
14.2.3.1 The Service Group Add/Edit Screen
The Service Group Add/Edit screen allows you to create a new service group or edit an existing one. To
access this screen, go to the Service Group screen (see
Section 14.2.3 on page 220), and click either the
Add icon or an Edit icon.
Figure 152 Object > Service > Service Group > Add/Edit
Table 113 Object > Service > Service Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Reference Select an entry and click Reference to check which settings use the entry.
Name This field displays the name of each service group.
By default, the Zyxel Device uses services starting with “Default_Allow_” in the security policies
to allow certain services to connect to the Zyxel Device.
Description This field displays the description of each service group, if any.
Reference This displays the number of times an object reference is used in a profile.
To Next Page
Loading...
