ZyXEL Communications USG FLEX H Series - Page 267

Chapter 16 Content Filtering
USG FLEX H Series User’s Guide
267
All LAN clients are now blocked from using TeamViewer.
This example uses the parameters listed below.
1 Go to Security Service > Content Filtering and click Add.
2 Configure the profile settings using the parameters given in Table 133 on page 267.
3 Select the Remote Access checkbox under Managed Categories.
Table 133 Content Filtering Profile Configuration Example
PROFILE NAME ACTION LOG MANAGED CATEGORIES
NoRemoteAccess Block Log Alert Remote Access
Table 134 Block List Configuration Example
LOG BLOCK LIST KEYWORD
Log Alert *.*teamviewer*.*
Table 135 Security Policy Configuration Example
TO FROM LOG CONTENT FILTERING PROFILE
WAN LAN By Profile NoRemoteAccess