Chapter 23 User & Authentication
USG FLEX H Series User’s Guide
338
The following table describes the labels in this screen. See Section 23.1.4.1 on page 338 for more
information as well.
23.1.4.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To access this
screen, go to the Group screen, and click either the Add icon or an Edit icon.
Figure 208 User & Authentication > User/Group > Group > Add
The following table describes the labels in this screen.
Table 168 User & Authentication > User/Group > Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so. Removing a group does not remove the user accounts in the group.
Group Name This field displays the name of each user group.
Description This field displays the description for each user group.
Member This field lists the members in the user group. Each member is separated by a comma.
Reference This displays the number of times an object reference is used in a profile.
Table 169 User & Authentication > User/Group > Group > Add
LABEL DESCRIPTION
Name Type the name for this user group. You may use 2-30 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is case-
sensitive. User group names have to be different than user names.
Description Enter the description of the user group, if any. You can use up to 60 characters, punctuation
marks, and spaces.
To Next Page
Loading...
