ZyXEL Communications USG FLEX H Series - Page 398

Chapter 25 Log and Report
USG FLEX H Series User’s Guide
398
How to add this Zyxel Device to SecuReporter
1 Log in to the SecuReporter portal.
2 Go to More > Organization & Devices, click Add Organization to create an organization.
3 Add this Zyxel Device to the organization you created using the hyper link under Unclaimed.
Click Log & Report > SecuReporter to open the following screen.
Figure 245 Log & Report > SecuReporter
The following table describes the labels in this screen.
Table 198 Log & Report > SecuReporter
LABEL DESCRIPTION
Enable This must be enabled to have SecuReporter collect and analyze logs from this Zyxel
Device.
It’s selected by default if you have activated a SecuReporter license.
Categories Select the categories of logs that you want this Zyxel Device to send to SecuReporter for
analysis and trend spotting.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.