ZyXEL Communications XGS4600 Series - Enable VLAN Mapping; What You Can Do

Chapter 31 VLAN Mapping
XGS4600 Series User’s Guide
335
31.1.2 What You Can Do
• Use the VLAN Mapping screen (Section 31.2 on page 335) to enable VLAN mapping on the Switch and
ports.
• Use the VLAN Mapping Configure screen (Section 31.2.1 on page 336) to enable and edit the VLAN
mapping rules.
31.2 Enable VLAN Mapping
Click Advanced Application and then VLAN Mapping in the navigation panel to display the screen as
shown.
Figure 263 Advanced Application > VLAN Mapping (Standalone Mode)
Figure 264 Advanced Application > VLAN Mapping (Stacking Mode)