Chapter 9 VLAN
XGS4600 Series User’s Guide
126
Figure 98 Advanced Application > VLAN > VLAN Detail (Standalone Mode)
Figure 99 Advanced Application > VLAN > VLAN Detail (Stacking Mode)
The following table describes the labels in this screen.
9.4 Private VLAN Status
Use this screen to view all private VLANs created on the Switch. Click Advanced Application > VLAN >
Private VLAN Status to see the following screen.
Table 43 Advanced Application > VLAN > VLAN Detail
LABEL DESCRIPTION
VLAN Status Click this to go to the VLAN Status screen.
VID This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
Slot ‘Slot’ refers to a Switch in the ‘virtual chassis’ stack. This field displays the slot ID of the stacked
Switch.
Port Number This column displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as “–“.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the Switch.
• Dynamic – using GVRP
• Static – manually added as a normal VLAN
• Private – manually added as a private VLAN (primary, isolated or community)
• RMirror – manually added as a remote port mirroring VLAN
• MVR – added through Multicast VLAN Registration (MVR)
To Next Page
Loading...
