Chapter 50 OSPF
XGS4600 Series User’s Guide
462
50.9 IPv6 OSPF Status
Use this screen to view current IPv6 OSPF status. Click IP Application > OSPF > IPv6 OSPF in the navigation
panel to display the screen as shown next.
Figure 366 IP Application > OSPF > IPv6 OSPF > OSPF Status
The following table describes the labels in this screen.
Table 214 IP Application > OSPF > IPv6 OSPF > OSPF Status
LABEL DESCRIPTION
OSPF This field displays whether OSPF is activated (Running) or not (Down).
Interface The text box displays the OSPF status of the interface(s) on the Switch.
Neighbor The text box displays the status of the neighboring router participating in the OSPF network.
Link State
Database
The text box displays information in the link state database which contains data in the LSAs.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the refresh
interval by typing a new number in the text box and then clicking Set Interval.
Stop Click Stop to end OSPF status polling.
To Next Page
Loading...
