EasyManua.ls Logo

ZyXEL Communications XGS4600 Series - Page 463

ZyXEL Communications XGS4600 Series
645 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 50 OSPF
XGS4600 Series User’s Guide
463
The following table describes some common output fields.
Table 215 IP Application > IPv6 OSPF > OSPF Status: Common Output Fields
FIELD DESCRIPTION
Interface
Interface ID This field displays the ID number of the IPv6 interface.
Internet Address This field displays the IPv6 link-local/global addresses and prefix length for the IPv6 interface.
Neighbor
Neighbor ID This field displays the router ID of the neighbor.
Pri This field displays the priority of the neighbor. This number is used in the designated router
election.
Dead Time This field displays the dead time in seconds the Switch waits for a hello packet from the
interface's neighbor device before declaring that the neighbor device is not available. The
default value is 40 seconds.
State/IfState This field displays the state of the neighbor (Init, ExStart, Exchange or Full) and whether the
neighbor interface is acting as a DR (designated router), BDR (backup designated router) or
DRother.
Duration This field displays how long a relationship between the neighbor and the Switch IPv6
interface has been established to exchange routing information.
I/F [State] This field displays the name of the Switch IPv6 interface and whether it is a (DR (designated
router), BDR (backup designated router) or DRother).
Link State Database
Type This field displays the type of the LSA.
Type 1: Router LSA
•Type 2: Network LSA
Type 3: Inter-Area Prefix LSA
Type 4: Inter-Area Router LSA
Type 5: AS-External LSA
Type 6: Group Membership LSA
•Type 7: NSSA LSA
Type 8: Link LSA
Type 9: Intra-area Prefix LSA
LSId This field displays the link state ID to identify what is advertised by the LSA.
Adv Router This field displays the router ID of the layer-3 device that sends the LSAs.
Age This field displays the time (in seconds) since the last LSA was sent.
Seq Num This field displays the link sequence number of the LSA.
Checksum This field displays the checksum value of the LSA.
Link Count This field displays the number of links in the LSA.
Payload This field displays the router ID for LSA type 1 or 2, the next-hop router address for LSA type 8,
and the IPv6 prefix of the route entry for other LSA types.

Table of Contents

Other manuals for ZyXEL Communications XGS4600 Series

Related product manuals