Chapter 25 Multicast
XGS4600 Series User’s Guide
276
25.5 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver ports and a source port for each
multicast VLAN. Click Advanced Application > Multicast > MVR to display the screen as shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you create
a multicast VLAN in this screen.
End Address This field displays the end of the multicast IPv6 address range.
To delete the profiles and all the accompanying rules, select the profiles that you want to
remove, then click the Delete button. You can select the check box in the table heading
row to select all profiles.
To delete a rules from a profile, select the rules that you want to remove, then click the
Delete button.
Delete Click Delete button to permanently delete the entries you selected.
Cancel Click Cancel to clear the check boxes.
Table 110 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering > Filtering
Profile (continued)
LABEL DESCRIPTION
To Next Page
Loading...
