Chapter 33 sFlow
XGS4600 Series User’s Guide
343
CHAPTER 33
sFlow
This chapter shows you how to configure sFlow to have the Switch monitor traffic in a network and send
information to an sFlow collector for analysis.
33.1 sFlow Overview
sFlow (RFC 3176) is a standard technology for monitoring switched networks. An sFlow agent embedded
on a switch or router gets sample data and packet statistics from traffic forwarded through its ports. The
sFlow agent then creates sFlow data and sends it to an sFlow collector. The sFlow collector is a server
that collects and analyzes sFlow datagram. An sFlow datagram includes packet header, input and
output interface, sampling process parameters and forwarding information.
sFlow minimizes impact on CPU load of the Switch as it analyzes sample data only. sFlow can
continuously monitor network traffic and create reports for network performance analysis and
troubleshooting. For example, you can use it to know which IP address or which type of traffic caused
network congestion.
Figure 271 sFlow Application
33.2 sFlow Port Configuration
Click Advanced Application > sFlow in the navigation panel to display the screen as shown.
To Next Page
Loading...
