ZyXEL Communications XGS4600 Series - Ipv6 Configuration

Chapter 8 Basic Setting
XGS4600 Series User’s Guide
103
8.9.3 IPv6 Configuration
Use this screen to configure IPv6 settings on the Switch. Click the IPv6 Configuration link in the Basic
Setting > IPv6 screen. The following screen opens.
Figure 78 Basic Setting > IPv6 > IPv6 Configuration
The following table describes the labels in this screen.
Preferred
Lifetime
This field displays how long (in seconds) that the global address remains preferred.
Valid
Lifetime
This field displays how long (in seconds) that the global address is valid.
DNS This field displays the DNS server address assigned by the DHCPv6 server.
Domain List This field displays the address record when the Switch queries the DNS server to resolve domain
names.
Restart
DHCPv6 Client
Click Click Here to send a new DHCP request to the DHCPv6 server and update the IPv6 address
and DNS information for this interface.
Table 25 Basic Setting > IPv6 > IPv6 Interface Status (continued)
LABEL DESCRIPTION
Table 26 Basic Setting > IPv6 > IPv6 Configuration
LABEL DESCRIPTION
IPv6 Global Setup Click the link to go to a screen where you can configure the global IPv6 settings on the
Switch.
IPv6 Interface Setup Click the link to go to a screen where you can enable an IPv6 interface on the Switch.
IPv6 Addressing
IPv6 Link-Local
Address Setup
Click the link to go to a screen where you can configure the IPv6 link-local address for an
interface.
IPv6 Global
Address Setup
Click the link to go to a screen where you can configure the IPv6 global address for an
interface.
IPv6 Neighbor
Discovery
IPv6 Neighbor
Discovery Setup
Click the link to go to a screen where you can configure the IPv6 neighbor discovery
settings.
IPv6 Router
Discovery Setup
Click the link to go to a screen where you can configure the IPv6 router discovery settings.
IPv6 Prefix Setup Click the link to go to a screen where you can configure the Switch’s IPv6 prefix list.