Chapter 38 Private VLAN
XGS4600 Series User’s Guide
369
Advanced > VLAN > VLAN Port Setting.
This is the communication process if primary VLAN P-VLAN 100 is associated with community VLAN C-
VLAN 101 and isolated VLAN I-VLAN 102.
• Promiscuous ports in P-VLAN 100 can communicate with all ports in P-VLAN 100 including community
ports in C-VLAN 101 and isolated ports in I-VLAN 102.
• Community ports in C-VLAN 101 can communicate with promiscuous ports in P-VLAN 100 and other
community ports in C-VLAN 101. They cannot communicate with isolated ports in I-VLAN 102.
• Isolated ports can communicate with promiscuous ports in P-VLAN 100. They cannot communicate
with other isolated ports in I-VLAN 102 nor community ports in C-VLAN 101.
Note: Isolation in VLAN > VLAN Port Setting has a higher priority than private VLAN settings, so
promiscuous ports with Isolation in VLAN > VLAN Port Setting enabled will not be able to
communicate with each other.
38.1.1 Configuration
You must go to the Static VLAN screen first to create VLAN IDs for Primary, Isolated or Community VLANs.
Click Advanced Application > Private VLAN to display the following screen.
Table 166 Spanning PVLAN Graphic Key
LABEL DESCRIPTION
UP Uplink promiscuous port
TP VLAN-trunking ports
S1, S2 Switch 1, Switch 2
P-VLAN 100 Primary private VLAN with VLAN ID tag of 100
C-VLAN 101 Community private VLAN with VLAN ID tag of 101
I-VLAN 102 Isolated private VLAN with VLAN ID tag of 102
To Next Page
Loading...
