February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930 Page 83
Owner is only used for information and will be a part of the Meta data
from the sensor. Not used in any calculations.
Figure 5-17: Site Info
Interface is the interface between sensor and PC. But when used in
AiCaP mode the only alternative is RS-232 as this is the used to configure
a AiCaP sensor not connected to an Aanderaa AiCaP logger,
Figure 5-18: Serial Port
To Next Page
Loading...