Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Reservedb5…6
1 = (When AC voltage-type reactive power reference is
being used)
Input of AC control is being limited
AC diff maxb7
1 = (When AC voltage-type reactive power reference is
being used)
Input of AC control is being limited
AC diff minb8
Reservedb9…15
1 = 10000h…FFFFh
- / uint16
(Only visible when IGBT supply unit control activated
by
95.20
)
Displays limit word 3 of the supply unit.
This parameter is read-only.
LSU limit word 330.103
1 = Power is being limited by the undervoltage
controller
Undervoltage limitb0
1 = Power is being limited by the overvoltage controllerOvervoltage limitb1
1 = Power is being limited by temperature or user power
limits (see parameters 30.148 and 30.149)
Motoring powerb2
1 = Power is being limited by temperature or user power
limits (see parameters 30.148 and 30.149)
Generating powerb3
1 = Active current is being limited. For details, see bits
6…9 and 14…15.
Active current limitb4
1 = Reactive current is being limited. For details, see
bits 12…13.
Reactive current
limit
b5
1 = Active current is being limited by internal main
circuit thermal limit
Thermal limitb6
1 = Active current is being limited by internal safe
operation area limit
SOA limitb7
1 = Active current is being limited by current limit set
by supply control program parameters
User current limitb8
1 = Active current is being limited based on internal
maximum thermal IGBT stress limit
Thermal IGBTb9
Reservedb10…11
1 = Negative reactive current is being limited by
maximum total current
Q act negb12
1 = Positive reactive current is being limited by
maximum total current
Q act posb13
1 = Negative active current is being limited by maximum
total current
P act negb14
1 = Positive active current is being limited by maximum
total current
P act posb15
1 = 10000h…FFFFh
314 Parameters
To Next Page
Loading...
