Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Fault / uint16
(Only visible when supply unit control activated by
95.20
)
Selects how the inverter unit reacts to a communication
break between the inverter unit and the other converter
(typically the supply unit).
WARNING!
With settings other than Fault, the inverter unit
will continue operating based on the status
information that was last received from the
other converter. Make sure this does not cause
danger.
INU-LSU comm loss
function
60.79
0No action taken.No action
1The drive generates a warning (AF80 INU-LSU comm
loss).
Warning
2Drive trips on 7580 INU-LSU comm loss.Fault
422 Parameters
To Next Page
Loading...
