Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / -Data received as word 1 of data set 10.0...65535
- / uint16Displays (in integer format) the data received from the
external controller as word 2 of data set 10.
A target for this data can be selected by parameter
62.52 Data set 10 data 2 selection. The value can also
be used as a source by another parameter.
Data set 10 data 2
value
62.102
- / -Data received as word 2 of data set 10.0...65535
- / uint16Displays (in integer format) the data received from the
external controller as word 3 of data set 10.
A target for this data can be selected by parameter
62.53 Data set 10 data 3 selection. The value can also
be used as a source by another parameter.
Data set 10 data 3
value
62.103
- / -Data received as word 3 of data set 10.0...65535
- / uint16Displays (in integer format) the data received from the
external controller as word 1 of data set 12.
A target for this data can be selected by parameter
62.54 Data set 12 data 1 selection. The value can also
be used as a source by another parameter.
Data set 12 data 1
value
62.104
- / -Data received as word 1 of data set 12.0...65535
…………
- / uint16Displays (in integer format) the data received from the
external controller as word 3 of data set 24.
A target for this data can be selected by parameter
62.74 Data set 24 data 3 selection. The value can also
be used as a source by another parameter.
Data set 24 data 3
value
62.124
- / -Data received as word 3 of data set 24.0...65535
LSU SW / uint32(Parameters 62.151…62.203 only visible when supply
unit control activated by 95.20)
Parameters 62.151…62.153 define a target for the data
received in data set 11 from another converter (typically
the supply unit of the drive).
Parameters 62.201…62.203 display the data received
from the other converter in integer format, and can be
used as sources by other parameters.
For example, this parameter selects a target for word
1 of data set 11. Parameter 62.201 INU-LSU data set 11
data 1 value displays the received data in integer
format, and can also be used as a source by other
parameters.
INU-LSU data set 11
data 1 sel
62.151
0None.None
4Status word of the supply unit.LSU SW
See Terms and abbreviations (page 130).Other [value]
None / uint32Defines a target for the data received as word 2 of data
set 11.
See also parameter 62.202 INU-LSU data set 11 data 2
value.
For the selections, see parameter 62.151 INU-LSU data
set 11 data 1 sel.
INU-LSU data set 11
data 2 sel
62.152
438 Parameters
To Next Page
Loading...
