Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
None / uint32Defines a target for the data received as word 3 of data
set 11.
See also parameter 62.203 INU-LSU data set 11 data 3
value.
For the selections, see parameter 62.151 INU-LSU data
set 11 data 1 sel.
INU-LSU data set 11
data 3 sel
62.153
- / uint16Displays (in integer format) the data received from the
other converter as word 1 of data set 11.
A target for this data can be selected by parameter
62.151 INU-LSU data set 11 data 1 sel. The value can also
be used as a source by another parameter.
INU-LSU data set 11
data 1 value
62.201
- / -Data received as word 1 of data set 11.0...65535
- / uint16Displays (in integer format) the data received from the
other converter as word 2 of data set 11.
A target for this data can be selected by parameter
62.152 INU-LSU data set 11 data 2 sel. The value can also
be used as a source by another parameter.
INU-LSU data set 11
data 2 value
62.202
- / -Data received as word 2 of data set 11.0...65535
- / uint16Displays (in integer format) the data received from the
other converter as word 3 of data set 11.
A target for this data can be selected by parameter
62.153 INU-LSU data set 11 data 3 sel. The value can also
be used as a source by another parameter.
INU-LSU data set 11
data 3 value
62.203
- / -Data received as word 3 of data set 11.0...65535
- / uint16Displays the position value received from the master
drive via the drive-to-drive link.
This parameter is read-only.
D2D position
received
62.241
1 / 1 = 1Position value received from master.-2147483648...2147483647
- / uint16Displays the scaled velocity value received from the
master drive via the drive-to-drive link.
This parameter is read-only.
D2D velocity
received
62.242
1 / 1 = 1Speed value received from master.-32768...32767
Parameters 439
To Next Page
Loading...
