NoteEquipment
Used with the oil dispenserHose
Content is defined in section Standard tools
on page 393.
Standard toolkit
Additional equipment - Foundry Prime
NoteArt. no.Equipment
Mercasol3HAC034903-001Rust preventive
3HAC026759-001Sikaflex 521FC
12340011-116Loctite 574
Brush
3HAC035355-001Foundry Prime touch up kit
CAUTION
Always cut the paint with a knife and grind the paint edge when disassembling
parts. See Cut the paint or surface on the robot before replacing parts on page 201.
Draining, axis-1 gearbox
Use this procedure to drain the gearbox of oil.
Tip
In order to save time, a pneumatic oil dispenser can be used to suck the oil out
from the gearbox.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
to the robot, before entering the robot
working area.
1
WARNING
Handling gearbox oil involves several safety
risks. Before proceeding, please read the
safety information in the section Safety risks
during work with gearbox lubricants (oil or
grease) on page 37.
2
Continues on next page
162 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.5.3 Changing the oil, axis-1 gearbox on suspended robots
Continued
To Next Page
Loading...
