ABB IRB 4600 Foundry Prime - Page 316

Connectors, axis-3 and axis-4 motors
The figure shows the connectors of the axis-3 and axis-4 motors.
FB5
MP5
FB4
MP4
MP3
FB3
MP6
FB6
xx0900000410
Required equipment
NoteEquipment
Content is defined in section Standard tools
on page 393.
Standard toolkit
These procedures include references to the
tools required.
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
For art. no. see Reference information.Lifting tool, axis-2
For art. no. see Reference information.Lifting tool, axis-3
For spare part no. see Spare part lists on
page 399.
Motors
Additional equipment - Foundry Prime
NoteArt. no.Equipment
Mercasol3HAC034903-001Rust preventive
3HAC026759-001Sikaflex 521FC
12340011-116Loctite 574
Brush
3HAC035355-001Foundry Prime touch up kit
Continues on next page
316 Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
4 Repair
4.7.2 Refitting motors
Continued