ABB IRBT 2005 - Page 184

Illustration/NoteAction
xx1400001701
A Ø17xØ11x2 Washer, 3HAB4233-1
(8 pcs)
B M10x30 Hex socket head cap screw,
3HAB3409-51 (8 pcs)
Remove the screws and washers.5
xx1400001702
Let the ball bearing block slide out of the
bracket and linear guide.
6
Refitting the ball bearing block
Illustration/NoteAction
Remove the standard screws delivered with
the block and replace with the grease pipe
fitting taken from the old block.
1
Continues on next page
184 Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
4 Repair
4.3 Replacing the ball bearing blocks
Continued