Illustration/NoteAction
xx1300000940
Separate the two links by inserting a screw-
driver and pushing down until the links separ-
ate.
2
Refitting the side link
Illustration/NoteAction
xx1300000941
Position the links so that the two marks on the
side line up. Press the links together until they
snap together.
1
xx1300000942
Rotate the link to "close" it.2
Refitting the glide shoes
Illustration/NoteAction
Remove the glide shoes by pushing in the clips
with a screwdriver and then pulling out the glide
shoes.
1
Refit the glide shoes by pushing it into place
until it snaps.
2
252 Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
4 Repair
4.9.2 Replacing the side links and glide shoes
Continued
To Next Page
Loading...
