ABB IRBT 2005 User Manual

Illustration/NoteAction
Refit the brake release unit and strap the brake
release cables to the carriage.
2
See Fitting covers on page 89.Refit the covers.3
Mark the cables with a paint pen on both sides
of the strapping.
4
DANGER
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in the section First test run may
cause injury or damage on page 24.
5
See Test run on page 258.Perform a test run before powering up the track
to full speed and duty cycle.
6
Product manual - IRBT 2005 259
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
4 Repair
4.9.3 Replacing the cables
Continued

ABB IRBT 2005 Specifications

General

Brand	ABB
Model	IRBT 2005
Category	Robotics
Language	English