2: Hardware Installation
EtherNID GE / MetroNID TE / TE-R
• SFP-A: By default, this port is configured for connection to the client network. Configuration can be changed using
the management web interface.
• SFP-B: By default this port is configured for traffic monitoring.
• Management: For connection of a local management station. By default, this port is set to the static IP address
192.168.1.254/24 and connection is made by using an SSL or SSH Client.
• RJ-45-A: This port is configured for connection to the client network. This configuration can be changed using the
management web interface.
• RJ-45-B: This port is configured for connection to the carrier network and is set to operate as a DHCP client.
MetroNID TE-S
• SFP-A: By default, this port is configured for connection to the client network. Configuration can be changed using
the management web interface.
• SFP-B: By default this port is configured for traffic monitoring.
• Management: For connection of a local management station. By default, this port is set to the static IP address
192.168.1.254/24 and connection is made by using an SSL or SSH Client.
• SFP-C: This port is configured for connection to the client network. This configuration can be changed using the
management web interface.
• SFP-D: This port is configured for connection to the carrier network and is set to operate as a DHCP client.
To Next Page
Loading...
