3: Management & Configuration
Local scheduled hours
The history buckets will be generated by the local device according to the Scheduled hours selected (Hold CTRL key to
select more than one time). Finer granularity is possible using the Scheduled minutes and Schedule offset fields.
Local scheduled minutes
This allows the local scheduling to be set to trigger every 15 minutes, either on the hourly boundary or on the 00:15, 00:30
and 00:45 boundaries. Any selection is valid as long as there is at least one box selected.
Schedule offset
This allows the local scheduling to be offset by [0-14] minutes. Using this field, reports can be generated as often as 4
times per hour. When a large number of devices are set to generate report files, this can be used to spread the load on
the network and servers.
Examples:
z If a device has 3:00 and 15:00 selected in the Scheduled hours, plus 00:00 and 00:30 in the Scheduled
minutes with a Schedule offset of 0 minutes, reports will be generated at 3:00, 3:30, 15:00 and 15:30.
z If a device has all hours selected in the Scheduled hours, plus 00:15 and 00:45 in the Scheduled minutes with
a Schedule offset of 4 minutes, reports will be generated at the 19th and 49th minute of every hour.
Server URL
The full URL of the Server on which to send the history bucket files once retrieved.
Examples:
z http://mypc.com
z ftp://username:password@mypc.com
z tftp://192.168.1.5
To Next Page
Loading...
