Agilent 7100 Capillary Electrophoresis System User Manual 141
Using the Agilent 7100 Capillary Electrophoresis System 5
Capillary Electrophoresis, Plus High Pressure CE+p
6 Enable CE+p mode by selecting the option External Pressure Installed.
Figure 38 Select CE mode
7 Confirm your selection by clicking OK.
8 Make sure tube “8” is connected, see “Outlet Lift Connection to the Tubing
System” on page 138.
9 Close and restart ChemStation to fully apply the changes.
To Next Page
Loading...
