158 Agilent 7100 Capillary Electrophoresis System User Manual
5 Using the Agilent 7100 Capillary Electrophoresis System
Capillary Electrochromatography, CEC
CEC Control Using the CE Diagram
High pressure may be applied independently of the method for capillary
conditioning or cleaning by clicking the external pressure icon in the CE
diagram (see Figure 46 on page 152). This will cause a parameter setting field
to appear (see Figure 47 on page 154). From this field you may chose to apply
pressure to the inlet, outlet or both vials, and also whether to simultaneously
apply a voltage of -30 to 30 kV for a given time.
To Next Page
Loading...
Need help?
General
