Agilent Technologies 7100 - Method Parameter CE (Default Settings)

Agilent 7100 Capillary Electrophoresis System User Manual 253
Appendix 10
Setting Up a Test Sample Run
Method Parameter CE (Default Settings)
Vials
• Inlet home vial 4
• Outlet home vial 5
Cassette Temperature
• 20.0°C
High Voltage System
• Enable high voltage
• Voltage 0.0 V (will ramp up in accordance with timetable)
• Current 300 µA
• Power 6.0 W
• Low current limit OFF
Stoptime
• 10.0 minutes
Posttime
• OFF
Replenishment
• Replenishment and preconditioning parallel processing
• No replenishment used