Agilent 7100 Capillary Electrophoresis System User Manual 163
Troubleshooting and Diagnostics 6
CE Problem Solving
Leaks
The leak sensor in the Agilent CE instrument is located in the lower right part
of the instrument, see Figure 50.
Figure 50 Leak sensor position
When the leak sensor is activated:
• The error LED on the front of the instrument is illuminated.
• The CE status displays an error.
• A logbook entry is created.
• The run is stopped.
• Pressure is released.
• High voltage application is stopped.
To Next Page
Loading...
