Agilent 7100 Capillary Electrophoresis System User Manual 169
Troubleshooting and Diagnostics 6
Agilent Lab Advisor Software
Agilent Lab Advisor Software
The Agilent Lab Advisor software is a stand alone product that can be used
independently of a data system. Agilent Lab Advisor software helps to manage
the lab for high quality electrophoresis and chromatographic results and can
monitor in real time a single Agilent CE or all the Agilent GCs and LCs
configured on the lab intranet.
Agilent Lab Advisor software provides diagnostic capabilities for all Agilent
7100 CE instruments. This includes diagnostic capabilities, calibration
procedures and maintenance routines for all the maintenance routines.
The Agilent Lab Advisor software also allows users to monitor the status of
their CE instruments. The Early Maintenance Feedback (EMF) feature helps to
carry out preventive maintenance. In addition, users can generate a status
report for each individual CE instrument. The tests and diagnostic features
provided by the Agilent Lab Advisor software may differ from the descriptions
in this manual. For details, refer to the Agilent Lab Advisor software help files.
Configuration
The Lab Advisor software can communicate with a 7100 CE instrument via
LAN or by a serial connection (RS232 cable, null-modem). To configure a
connection, go to the section Configuration in the Lab Advisor software. Select
Instrument > Available Instruments and as the instrument type Agilent CE. You can
enter either the LAN address (for example 192.168.254.11) or the respective
COM port of your PC (for example Com1) under instrument address.
To Next Page
Loading...
Need help?
General
