Agilent Technologies 7100 - Method Parameter DAD

Agilent 7100 Capillary Electrophoresis System User Manual 255
Appendix 10
Setting Up a Test Sample Run
Method Parameter DAD
Signals: Signal, Bw (nm) Reference, Bw
• Use signal A: Yes wavelength 325, Bandwidth 10, no Reference
• Use signal B: Yes wavelength 192, Bandwidth 4, no Reference
• Use signal C: Yes wavelength 235, Bandwidth 10, no Reference
Peak width
• > 0.1 minutes (2.0 s response time) (2.5 Hz)
Stoptime
• As with CE
Posttime
• Off
Spectrum
• None
Autobalance
• Prerun Autobalance
Lamps Required for Acquisition
• UV lamp
Timetable
• No entry